866-296-3868
866-296-3868
The crew arrives at 8:00 and the gate is locked. Or the lawn is under a car park's worth of vendor vehicles. Or there is a sprinkler head exactly where the corner plate goes and nobody has the controller code. None of this is the crew's fault, and none of it was visible when you quoted. All of it costs you labour hours you probably cannot bill.
A site survey tells you what the site is. It cannot control what the client does between the survey and install day. The site-prep sheet is the handover: a short, plain document that tells the client what has to be true when the crew arrives, and that you ask them to confirm in writing.
Keep it to one page. If it runs longer, the client will not read it.
| Item | What you ask the client |
|---|---|
| Access | Gate codes, key holder's name and mobile number, truck route, any height or weight limits, loading area |
| Install area | Cleared of vehicles, furniture, dΓ©cor and vendor equipment by a stated time, with the footprint marked or confirmed on a plan |
| Ground | Which surface it is (grass, gravel, asphalt, concrete), and whether it has been irrigated or rained on recently |
| Underground services | Location of irrigation lines, sprinkler heads, septic, drains and cables; confirmation that staking is allowed |
| Power | Where power is available, and what it is rated for, if the order includes lighting, heating or cooling |
| Overhead | Trees, wires and eaves above the footprint |
| Schedule | Install window, event start, and strike window, with a named person who can approve changes |
| Permits | Who is responsible for applying, and the date the approval must be in hand |
If the tent will be staked, someone must confirm what is below the ground. Driving a stake through an irrigation line or a buried cable is expensive and can be dangerous. Ask the client to have utilities located, or to confirm in writing that the area is clear, before staking. Where staking is not permitted, you will need another anchoring method, and whether an alternative is adequate for the conditions is a job for an engineer or other qualified person. Our guides on staking on grass or gravel and anchoring on hard surfaces cover the options.
Be explicit about who is applying. "We assumed you had it" is the most common version of this failure. Requirements vary by location, and the authority having jurisdiction decides, so tell the client to confirm with their local office rather than relying on a general rule.
Put a number on it. "Crew needs the area clear and accessible from 8:00; after 9:00 we start billing standby time" is clear. This only works if your contract says so, so add the standby rate and the failed-access clause there first.
Estimate your own cost. Take your crew size, loaded hourly cost and typical standby hours lost per failed access. For example (estimate only; substitute your own numbers), four people at $45 an hour lost for 90 minutes is about $270 for one morning. Multiply by how often it happens in a season and the sheet pays for itself quickly.
Send the sheet with the confirmation, not on the day. Ask for a signed or emailed reply. Follow up by phone two or three days before, and again the afternoon before for larger jobs. Photograph the site on arrival so you have a record of its condition. Put your answers to the common questions into your pre-job routine so the crew arrives with the right gear for the surface described.
Clients often assume the footprint plus a little space. A tent needs clearance beyond its footprint for stakes, straps and walkways, so ask for the full working area, not just the tent dimensions. Our tent size guide lists the footprints, and the tent safety protocols page is a useful reference to share with clients. If you are expanding your fleet, see frame tents and tent accessories.

Need help building a sheet for your market? Call 866-296-3868. Se habla espaΓ±ol.
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}