14'4" Aluminum Double Tube for West Coast Style Frame Tents
Beyond Tent's technical team stocks this 14'4" aluminum double tube as a direct replacement section for West Coast style frame tent ridge and eave runs. Whether a section was bent in transit, dented during setup, or you're simply extending an existing run, this tube restores factory-spec dimensions so your fittings pin up tight and your roofline stays straight.
Fits standard West Coast style frames from most major manufacturers.
Why This Tubing Matters
West Coast frame systems rely on a custom aluminum extrusion — not a standard round tube — to accept fittings that are pinned in place with R-pins, pin-and-bail hardware, or bolts. A mismatched or undersized replacement tube can leave fittings loose or misaligned, which shows up as sag or play at the joints during a long rental cycle. This tube is manufactured to the same custom extrusion profile as the original, and it's color coded internally so your crew can identify it correctly at a glance during inventory or repair.
| Spec |
Detail |
| Material |
Aluminum, custom extrusion |
| Length |
14'4" |
| Outside Profile |
2.0" x 3.875" |
| Inside Diameter |
1.750" |
| Wall Thickness |
0.125" (1/8") |
| Tensile Strength |
35,000 PSI |
| Weight |
25.0 lbs |
| Identification |
Red interior color-coding for easy identification |
| Compatibility |
West Coast style frame tent fittings (R-Pin, Pin & Bail, or bolt-secured) |
| Shipping Method |
Ships ground |
| SKU |
1C-8874 |
Installation Notes from Our Install Crews
Check the drilled holes against your fittings before pinning a full run — extrusion tubing can shift slightly during shipping, and confirming hole alignment first saves a re-drill mid-setup. Note the red interior color-coding against your other West Coast tube stock so it doesn't get mixed with a different length or profile in storage.
